| 品牌：dgtech | 型号：FlexOpto NE | 接口：db9和光纤接口 |
| 用户线路数：3路 | 信令支持：支持 | 计费方式：否 |
| 机箱尺寸：110*200*70mm | 工作电压：12V | 适用范围：汽车 |
EMC测试用FlexRay转光纤设备
EMC测试用LIN转光纤中继器
dgtech公司EMC测试用can转光纤设备
EMC测试用FlexRay转光纤中继器
EMC Testing:
OVERVIEW
FlexOpto NE is a bidirectional media converter which transmits electrical FlexRay, CAN or LIN signals via optical fibre. For an independent use a high capacity lithium-ion battery allows an operation up to 40 h without charging. The PCB design is optimized for EMC tests, emits very little noise and is unsusceptible against high levels of electromagnetic noise.
Galvanic ***lation
Operating on internal a rechargeable lithium ion battery it can transmit the signals from a DUT into an EMC
chamber to the FlexOpto NE outside the EMC chamber via optical fibre.
? EMC optimized design with low emissions
- CISPR 25: 2008-03 ALSE–method
- Class 5
? Unsusceptible against noise up to 270 V/m of *** 11452-2:2004-11
? Integrated battery, up to 40 h operation; operation with external power supply possible
? Integrated, switchable network termination with power resistors
? Supports FlexRay, CAN high-speed, LIN (only one bus at a time)
Features:
FlexOpto NE can be used as galvanic ***lation for CAN,
FlexRay or LIN networks to prevent the susceptible
measurement equipment.
Range Extender:
FlexOpto NE can function as range extender for CAN,
FlexRay or LIN networks.
dgtech公司EMC测试用can转光纤设备
EMC Testing:
OVERVIEW
FlexOpto NE is a bidirectional media converter which transmits electrical FlexRay, CAN or LIN signals via optical fibre. For an independent use a high capacity lithium-ion battery allows an operation up to 40 h without charging. The PCB design is optimized for EMC tests, emits very little noise and is unsusceptible against high levels of electromagnetic noise.
