| 加工定制：是 | 品牌：IXXAT | 型号：FO-Repeater |
| 产品用途：光纤传输信号 | 规格：FO-Repeater |
FO-Repeater：光纤中继器ixxat品牌ST接头，1.01.0063.01020CAN Fiber Optic Repeater - Glass fiber version with ST connector
Technical Data
| Display | Sending (2 green LEDs), defective segment (2 red LEDs) |
| CAN bus interface | *** 11898-2. Screw terminals. CAN termination resistors are integrated (switchable). |
| FOC connection | 2 x ST terminals for duplex line (Glass 50/125 ?m duplex) |
| Baudrate | Up to 888 kbps |
| Delay | ~300 ns (translates into ~60 m (~90 ft.) bus length) between the wire connection of a FO Repeater through the fiber optic cable to the wire connection of a second FO Repeater (not including the signal delay time of the fiber optics, which is ~5 ns/m) |
| Power supply | 9-35 V DC, 3 W typ., through terminals |
| Galvanic ***lation | 1 kV, 1 sec.; CAN 1 |
| Certification | CE |
| Temperature range | -20 ?C to +60 ?C |
| Housing, size | Plastic enclosure, 110 x 75 x 22 mm (without FO connector) |
技术数据
| 显示器 | 发送(2个绿色LEDs), 故障部分(2个红色LEDs) |
| CAN总线接口 | *** 11898-2. 旋转端子。集成CAN 终端电阻(可切换)。集成主干总线。 |
| FOC连接 | 2 x ST terminals for duplex line (Glass 50/125 ?m duplex) |
| 波特率 | 888 kbps |
| 延时 | 通过光纤线缆，从一个FO重复器的电线接头到***个FO重复器的电线接头(不包含光纤的信号延迟时间，即~5 ns/米)需要~300 ns (转换为~60 m (~90ft.)总线长度) |
| 电源 | 9-35 V DC, 3 W typ., 通过终端 |
| 电气隔离 | 1 kV, 1 sec.; CAN 1 |
| 认证 | CE |
| 温度范围 | -20 ?C to +60 ?C |
| 外壳, 尺寸 | 塑料外壳, 110 x 75 x 22 mm(不含FO连接器) |
