价 格
订货量
￥3500.00
5 - 49
￥3000.00
价格为商家提供的参考价，请通过"获取最低报价"
获得您最满意的心理价位~
≥50
| 产品特性：中继 | 是否进口：否 | 产地：上海 |
| 加工定制：否 | 品牌：AB | 型号：CAN-CR100 |
| 产品名称：can中继器 | 适用范围：自动化控制 | 用途：延长can总线传输 |
| 产品认证：cia | 特色服务：技术支持 | 最小包装数：1 |
| 物料编号： 1.01.0210.11020 | 尺寸：22.5 x 105 x 114 mm | 重量：100g |
CAN光纤中继器CAN-CR110/FO支持CAN FD光纤中继器
CAN Repeater CAN中继器CAN-CR100支持CAN FD
1.01.0210.20000，CAN-CR100，CAN FD中继器，can光纤中继器，支持Star和Tree等拓扑结构，支持基于CAN的各种高层协议的中继CAN-CR110/FO，CAN-CR120/HV，支持2000KV高压保护4通道CAN中继器CAN-CR300
CAN-CR100
CAN / CAN FD repeater with screw terminals
The CAN-CR100 is used for galvanic ***lation of two segments of a CAN / CAN FD network. As a special feature, the repeater separates a defective segment from the rest of the network, allowing the remaining network to continue working. After the fault has been eliminated, the segment is automatically switched back to the network. The galvanic ***lation is provided for the CAN / CAN FD segments as well as for the power supply.
CAN-CR100
CAN / CAN FD 中继器，带接线端子
CAN-CR100 用于对 CAN/CAN FD 网络的两段进行电流隔离。 作为一项特殊功能，中继器将有缺陷的网段与网络的其余部分分开，允许其余网络继续工作。 故障排除后，网段自动切换回网络。 为 CAN / CAN FD 段以及电源提供电流隔离。
FEATURES AND BENEFITS
CAN and CAN FD interfaces in one device
Cost savings due to simple wiring
Increased system reliability
Almost no influence on real-time behavior
特点和优点
CAN 和 CAN FD 接口在一个设备中
布线简单，节省成本
提高系统可靠性
对实时行为几乎没有影响
TECHNICAL SPECIFICATIONS
| Display | Transmit and defective segment (two duo LEDs, one for each segment), Power (one LED) |
| CAN bus interface | *** 11898-2 with CAN choke. Two screw terminals. Available with and without integrated CAN termination. |
| CAN bitrates | Up to 1 Mbit/s |
| CAN FD interface | *** CAN FD and non*** CAN FD |
| CAN FD bitrates | Arbitration rate up to 1000 kBit/s, data rate up to 8000 kbit/s. The data rates are verified by tests. User-defined bit rates are possible. Attention: The maximum data rate can be exceeded depending on the concrete operating conditions (cable length, settings made, remote stations,...), but it can also not be reached. |
| Delay | typ. 175 ns (corresponds to ~35 m bus length) |
| Power supply | 9-36 V DC, typ. 70 mA, max. 100 mA, through terminals |
| Galvanic ***lation | 1 kV DC / 1 sec, 500 V AC / 1 min; CAN 1, CAN 2 and power supply are galvanically ***lated from each other. |
| Certification | CE, FCC |
| Temperature range | -20 ?C ... +70 ?C |
| Housing, size | Plastic enclosure, 22.5 x 105 x 114 mm |
