| 产品特性：EMI测试 | 加工定制：否 | 种类：电磁屏蔽 |
| 品牌：德国MK | 型号：optoSENT | 特性：认证 |
| 材质：屏蔽线 | 用途：EME测试认证 |
德国MK公司生产optoSENT将SENT信号转换成光电光纤进行EMI或EME测试
optoSENT
The optoSENT system was developed for the transmission of asynchronous SENT signals (Single Edge Nibble Transfer) and exists in two different versions:
The asynchronous system can be used for the optical transmission (1 or 2 channels) with a resolution of min. 8Bit per channel and a maximal bandwidth of approx. 1MHz.
In the synchronous version the sampling is digital and the system can transmit a sync pulse to a sensor (1 or 2 channels). The connected sensor is powered by our transmitter (standard is 5V) and does not need any further wiring.
The system consists of a battery supplied transmitter and receiver which are connected via optical cables. With the optical transmission and the shielded case the devices are well equipped for EMI and EME tests.
One side of the system can be integrated in a 19" rack housing (optional). If the equipment is always used at the same place, this can reduce error sources, needs a shorter set up time, and does not occupy as much space on the table. The 19" case can hold up to 8 different or equal automotive links (SENT, CAN, Flexray etc.). The channels can be integrated later on.
optoSENT 系统是为传输异步 SENT 信号（单边半字节传输）而开发的，有两个不同的版本：
异步系统可用于光传输（1 或 2 个通道），每通道最小分辨率为 8Bit，带宽约为 1MHz。
在同步版本中，采样是数字的，系统可以将同步脉冲传输到传感器（1 或 2 个通道）。连接的传感器由我们的变送器（标准为 5V）供电，无需任何进一步的接线。
该系统由电池供电的发射器和接收器组成，它们通过光缆连接。凭借光传输和屏蔽外壳，这些设备为 EMI 和 EME 测试做好了准备。
系统的一侧可以集成到 19 英寸机架外壳（可选）中。如果设备始终在同一位置使用，这可以减少错误源，需要更短的设置时间，并且不会在桌面上占用太多空间。19 英寸外壳最多可容纳 8 个不同或相等的汽车链接（SENT、CAN、Flexray 等）。稍后可以集成这些通道
