| 是否进口：否 | 产地：德国 | 加工定制：是 |
| 品牌：peak system | 型号：PCAN-USB FD | 产品名称：can FD接口卡 |
| 适用范围：汽车电子调试 | 用途：can fd协议转换 | 产品认证：ce |
| 特色服务：上门服务 | 订货号：IPEH-004061 | 最小包装数：1pcs |
| 物料编号：IPEH004061 | 是否跨境货源：否 |
PCAN-USB FD peak system品牌can fd接口卡
The CAN FD adapter PCAN-USB FD allows the connection of CAN FD and CAN networks to a computer via USB. A galvanic ***lation of up to 500 Volts decouples the PC from the CAN bus. The simple handling and its compact plastic casing make the adapter suitable for mobile applications.
The new CAN FD standard (CAN with Flexible Data Rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit/s. CAN FD is downward-compatible to the CAN 2.0 A/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.
Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0)
Complies with CAN specifications 2.0 A/B and FD 1.0
CAN FD bit rates for the data field (64 bytes max.) from 40 kbit/s up to 12 Mbit/s
CAN bit rates from 40 kbit/s up to 1 Mbit/s
Time stamp resolution 1 μs
CAN bus connection via D-Sub, 9-pin
(in accordance with CiA? 102)
FPGA implementation of the CAN FD controller
NXP TJA1044GT CAN transceiver
Galvanic ***lation up to 500 V
CAN termination can be activated through a solder jumper
Measurement of bus load including error frames and overload frames
Induced error generation for incoming and outgoing CAN messages
5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
Voltage supply via USB
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Pin assignment D-Sub
| Pin | Pin assignment |
|---|---|
| 1 | not connected / optional +5V |
| 2 | CAN-L |
| 3 | GND |
| 4 | not connected |
| 5 | not connected |
| 6 | GND |
| 7 | CAN-H |
| 8 | not connected |
| 9 | not connected |
