| 加工定制：是 | 品牌：KEYENCE/基恩士 | 型号：CAN-CBM-DP |
| 产品用途：网关 | 规格：profibus-dp网关 |
将西门子s7系列PLC连通canopen模块或者can通讯模块，
profibus dp到can和canopen之间自由转换的网关，
CAN-CBM-DP，PROFIBUS-DP转can网关德国ESD品牌，profibus dp转canopen网关CAN-CBM-DP德国esd个公司生产C.2844.05
CAN-CBM-DP
PROFIBUS-DP?/CAN Gateway
Features
Fast and reliable linking PROFIBUS-DP and CAN
Application examples: SIMATIC-S7 to CAN layer 2 or CANopen?
DP-slave with up to 300 bytes data (partitioning from up to 244 bytes input and 56 bytes output to 244 bytes output and 56 bytes input)
CAN master: CAN layer 2, no limitation on CANopen PDO&＃39;s and SDO&＃39;s
No limitation on the number of CAN participants by the module
esd is a member of the PNO (PROFIBUS Nutzerorganisation e.V.)
- fast and reliable linking Profibus-DP and
CAN with data buffering
- CAN-PLC link, e.g. to
SIEMENS S7-300 or S7-400
- no limitation on the number of CAN
participants
Linking DP and CAN
The module CAN-CBM-DP can link any
Profibus-DP master to a CAN network. The
DP/CAN gateway operates as a slave-I/O
component with a total of maximum
300 bytes data (partitioning from up to 244
bytes input and 56 bytes output to 244
bytes output and 56 bytes input data) on
the DP-bus.
Applications
With the CAN gateway you can couple CAN
modules with CANopen or layer-2
implementation to e.g. a SIMATIC-S7.
The number of CAN participants is not
limited by the module.
Physical Interfaces
The *** 11898-compatible CAN interface
allows a maximum data-transfer rate of
1 Mbit/s. The Profibus-DP-Slave interface
automatically recognizes all usual bit rates
up to 12 Mbit/s.
The DP as well as the CAN interface are
electrically ***lated by optocouplers and
DC/DC converters.
Serial interface
The module has a serial interface (default:
RS-232) for service and configuration. It is
connected by a DSUB9 connector.
Configuration and CAN protocols
For the I/O data mapping of the DP slave a
configuration software for Windows95/98 or
Windows NT is available.
CANopen is supported as Layer-7 protocol
on the CAN layer.
