| 加工定制：是 | 品牌：E+H/恩德斯豪斯 | 型号：profibus dp slave网关 |
| 产品用途：profibus dp网关 | 规格：profibus dp网关 |
profibus dp slave网关CAN-DP/2德国esd生产货号C.2907.02。将can通信模块连接到SIEMENS SIMATIC S7-300 or S7-400
CAN-PLC link, e.g. to SIEMENS SIMATIC S7-300 or S7-400
DP-slave with a total maximum of 300 bytes process data (input and output)
Diagnostics interface via USB-virtual COM-port
No limitation on the number of CAN nodes by the module
11- and 29-bit CAN-ID support
The CAN-DP/2 can be easily configured via a PROFIBUS configuration tool
esd is a member of the PNO (PROFIBUS Nutzerorganisation e.V.)
The module CAN-DP/2 can link any Profibus-DP master to a CAN network. The DP/CAN gateway operates as a slave-I/O component with a total of maximum 300 bytes process data (up to 244 bytes input and 56 bytes output or up to 244 bytes output and 56 bytes input data) on the DPbus.
With the CAN gateway you can couple CAN modules with CANopen or layer-2 implementation to e.g. a SIMATIC-S7. The number of CAN nodes is not limited by the module.
The *** 11898-compatible CAN interface allows a maximum data-transfer rate of 1 Mbit/s. The Profibus-DP-Slave interface automatically recognizes all usual bit rates up to 12 Mbit/s. The DP as well as the CAN interface are electrically ***lated.
The module can be configured via PROFIBUS configuration tool, e.g. the PLC SIMATIC Manager
HardwareOrder No.
