| 产品特性：can以太网 | 是否进口：否 | 产地：上海 |
| 加工定制：否 | 品牌：德国IXXAT | 型号：CAN@net NT |
| 产品名称：can以太网 | 适用范围：自动化控制 | 用途：can通讯 |
| 产品认证：ce | 特色服务：软件开发 | 最小包装数：1 |
| 物料编号： 1.01.0332.10000 | 尺寸：188*159*100 | 重量：100g |
Can以太网转can口支持网关CAN@net NT 100/200/420
CAN@net NT 100/200/420 Up to 4 x CAN (2 x CAN FD) CAN-Ethernet gateway, bridge and PC CAN-Ethernet 网关、网桥和 PC 接口
CAN@net NT 100/200/420
最多 4 个 CAN（2 个 CAN FD）
CAN-Ethernet 网关、网桥和 PC 接口
CAN@net NT 提供三种型号，作为带有一个*** CAN 通道和 D-Sub 9 连接器的 CAN@net NT 100，作为带有两个*** CAN 通道的 CAN@net NT 200 和作为带有四个 CAN 的 CAN@net NT 420 通道，其中两个通道可在 CAN 和 CAN FD 之间切换。 所有设备均提供三种操作模式，可作为PC接口用作桥接器和网关。
The CAN@net NT is offered in three variants, as CAN@net NT 100 with one classic CAN channel and D-Sub 9 connector, as CAN@net NT 200 with two classic CAN channels and as CAN@net NT 420 with four CAN channels, of which two channels can be switched between CAN and CAN FD. All devices offer three operation modes and can be used as a PC interface as bridge and gateway.
Can以太网转can口支持网关CAN@net NT 100/200/420，CAN-Ethernet 网关、网桥和 PC 接口，can转以太网接口，can转以太网网关，can转以太网网桥
Can转以太网模块can转以太网网关can转以太网设备CAN@netNT100/200/420，CAN-Ethernet网关、网桥和PC接口，can转以太网接口，can转以太网网关，can转以太网网桥
技术参数：
多达四个独立的 CAN 通道（2 个 CAN FD 通道）
强大的过滤器、ID 转换、数据映射和多路复用功能
MQTT 支持轻松的云连接（发布者和订阅者）
使用事件触发的“动作规则”执行预定义的动作
使用 LUA 对任何类型的操作规则进行编程
Windows 配置工具，可通过 USB 或以太网轻松配置
设备访问的可配置安全级别（配置或固件上传）
专为工业环境中的高性能而设计
好处
CAN 和 CAN-FD 系统和设备的轻松耦合
使用以太网桥接远距离和轻松的远程系统访问
布线简单，节省成本
允许系统扩展和树形/星形拓扑
提高系统可靠性
通过电流隔离进行线路保护
FEATURES
Up to four independent CAN channels (2 CAN FD channels)
Powerful filter, ID translation, data mapping and multiplexing functionality
MQTT support for an easy cloud connection (publisher and subscriber)
Execution of pre-defined actions using event-triggered "Action Rules"
Programming of any kind of action rules using LUA
Windows configuration tool for easy configuration via USB or Ethernet
Configurable security levels for device access (configuration or firmware upload)
Designed for high performance in industrial environments
BENEFITS
| 1.01.0332.10000 | CAN@net NT 100 - 1 CAN channel* |
| 1.01.0332.20000 | CAN@net NT 200 - 2 CAN channels* |
| 1.01.0332.42000 | CAN@net NT 420 - 4 CAN channels (2 switchable to CAN FD)* |
* Please note: CAN@net NT 100, CAN@net NT 200 and CAN@net NT 420 can not be combined. For a CAN-Ethernet-CAN-Bridge please use either CAN@net NT 100, CAN@net NT 200 devices or CAN@net NT 420 devices.
Easy coupling of CAN and CAN-FD systems and devices
Bridging of large distances and easy remote system access using Ethernet
Cost savings due to simple wiring
Allows system expansion and tree/star topologies
Increased system reliability
Line protection by galvanic ***lation
TECHNICAL SPECIFICATIONS
| Ethernet interface | 10/100 MBit/s, twisted pair, RJ45 connector |
| CAN channels | CAN@net NT 100: 1 x CAN CAN@net NT 200: 2 x CAN CAN@net NT 420: 4 x CAN (two of them with CAN FD) |
| CAN connection | CAN@net NT 100: D-Sub 9 CAN@net NT 200: Screw connector CAN@net NT 420: Screw connector |
| Max. number of bus nodes | 120 |
| CAN bus termination resistor | None |
| CAN bitrates | 5 to 1000 kBit/s |
| CAN FD bitrates | Arbitration rate up to 1000 kBit/s, data rate up to 8000 kbit/s. The data rates are verified by tests. User-defined bit rates are possible. Attention: The maximum data rate can be exceeded depending on the concrete operating conditions (cable length, settings made, remote stations,...), but it can also not be reached. |
| Power supply | 9 V to 36 V DC |
| Current consumption | typically 110 mA (at 24 V input voltage) or 230 mA (at 12 V input voltage) |
| Temperature range | Operating temperature -40 °C to +85 °C, Storage temperature -40 °C to +85 °C |
| Galvanic ***lation | 1 kV for 1 sec. |
| Certification | CE, FCC, UL |
| Housing | Polyamide housing for top hat rail mounting |
| Protection class | IP20 |
| Size | approx. 114.5 x 99 x 22.5 mm |
| Weight | approx. 150 g |
